DWE-FTECB
Gigabit Fiber to Ethernet Converter Board for ROV/AUV
Pairs well with
Gigabit Fiber to Ethernet Converter Board for ROV/AUV
Description
10/100/1000M Copper to 1000Base-X Fiber
This bare PCB converts CAT 5 Ethernet signals from the RJ-45 port to signals compatible with single mode SFP transceivers and vice versa. By using this media converter, copper Ethernet signals can be extended up to 20km depending on the SFP transceiver used (a much larger distance than the 100 meters limit for copper Ethernet signals).
Unlike many other fiber converters, this is designed to be as space efficient as possible specifically for ROV use cases. It can be easily paired with almost all single-board computers (Raspberry Pi, Nvidia Jetson). Additionally, many considerations were in place to design this board as power efficient as possible, reducing generated heat and maximizing the flight time on your ROV!
Technical Data
Drawings
Content
CORE FEATURES
Small Form Factor
With a surface area of 78x44mm, smaller than a Raspberry Pi, easily install within a waterproof enclosure.
Power Efficient
Consumes less than 1W.
(Tested using 2KM Transceivers)
Ease of Operation
Plug-and-play experience, no software installation required.
Wide Compatibility
Works with 1G Transceivers. Both BiDi or Duplex Modules.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.